EPDM Seal Pipe Dismantling Joint , Thrust Type Dismantling Joint High Temperature

Specification

DN50-DN2000(2"-80"), available with PN10, PN16, PN25 and PN40 flanges.

Standard

ISO2531, ISO4179, ISO8179, BS EN 545, BS EN598, BS4772, ISO7005-2, EN1092-2:1997, DIN2501, GBT13295

Pressure

300PSI, 500PSI, 750PSI, 1000PSI

Pipe ends

Spigot, socket or flanges.

Internal coating

Cement mortar lining comply with ISO4179 or bitumen painting (Ave. min.70 micron) or Fusion Bonded Epoxy Coating

External coating

Sprayed metallic zinc coating (min.150g/m²) according to ISO8179 + bitumen painting (min.70 micron) or epoxy powder coating or epoxy painting or according to customer's requirements.

Test

In accordance with ISO 2531 / EN 545 / EN598 and 100% water pressure test.

Accessories

NBR, SBR, EPDM rubber ring according to ISO4633 / EN681.1 are available.

Application

Municipal Use,Waterworks Pipelines,Piping Fittings,Water Engineering,Potable Water Use,Irrigation Use,Water Supply Project Use,Water Treatment Plants Use,Pumping Stations,Water Utility Sectors,Water-Supply Pressure Pipeline,Potable Water Pumping Station,Stormwater Lines,Fire Water Pumping Station,Fresh Water Pumping Station, ect.

Types

Dismantling Joint,Universal Flange Adaptor,Universal Coupling,Ductile Iron Loose Flange Joint,DI Pipe Fitting,Saddle for PVC Pipe,Repair Clamp,Qucick Flange Adaptor,Gibault Joint,Restrained Flange Adaptor,Restrained Coupling,Valve,etc.